Torque and speed profile for the load match
The BEH18LH2033CA6C delivers 6.37 Nm nominal torque at 3000 rpm, with a peak stall torque of 19.11 Nm — that 3:1 peak-to-nominal ratio handles short-duration acceleration events like a rapid traverse or a quick index move without oversizing the motor frame. Continuous power is 2000 W at 220 V single-phase input, and the continuous stall current sits at 12 A — the motor can hold full torque at zero speed for positioning applications without exceeding thermal limits, as long as the air cooling path is clear.
Encoder resolution and feedback integrity
A 23-bit optic multi-turn encoder rides the shaft — that gives 8,388,608 counts per revolution and absolute position tracking over multiple turns. No homing sequence needed after a power cycle; the drive knows the axis position on boot. The torque constant is 0.53 Nm/A at 40 °C, and the back EMF constant is 36.4 V/krpm — these two numbers let the drive calculate the motor current required for a given torque and predict the voltage rise at speed. Match them to the drive's current loop gain settings during commissioning.
IP67 and flange dimensions for the machine envelope
IP67 rating on the motor body means it handles washdown and coolant splash without an additional cover — the shaft seal and connector O-rings are the wet-end barriers. Suitable for food processing lines or machining centres with cutting fluid. The Asian standard flange measures 100 mm square, with four 9 mm mounting holes on a 144.5 mm bolt circle. Overall depth is 167.4 mm, and the shaft is 24 mm diameter with a parallel key — confirm the mating bore and keyway before the motor lands on the machine.
Sourced through authorized distribution channels; quantities quoted against the BOM at RFQ. The motor ships with the mating connector halves — no separate accessory order needed for the electrical connection.