What torque and speed range does this BEH18 deliver at 380 V?
Rated for 2000 W nominal output power at 380 V three-phase, this BEH18LH2033CA6D delivers 6.37 N.m nominal torque and 3000 rpm nominal speed — the load-driving numbers that govern sizing in a Lexium 18 motion axis. Peak stall torque reaches 19.11 N.m under the same 380 V supply, giving headroom for acceleration transients without oversizing the motor frame.
Encoder resolution and feedback type
The 23-bit optic multi-turn encoder provides 8,388,608 counts per revolution absolute position — enough resolution for high-accuracy indexing or contouring without a separate external encoder. Optic encoder technology means the feedback is non-contact and wear-free, but the glass disc is sensitive to contamination — the IP67 rating on the motor body protects the encoder housing in washdown or dusty environments.
Mounting and mechanical interface
Asian standard flange with 100 mm flange size, four mounting holes at 9 mm diameter — fits the common 100 mm square bolt pattern used across Asian-spec machine frames. Shaft is 24 mm diameter with parallel key, 45 mm shaft length; no second shaft end. Maximum radial force 686 N and axial force 196 N — stay within these limits to avoid bearing overload in belt-drive or direct-coupling applications.