Skip to main content
Log in
Schneider Electric BEH18LM3033MF6D — Servo Motors with Brake

Schneider Electric BEH18LM3033MF6D Servo Motor with Brake

MPNBEH18LM3033MF6D
Active

Schneider Electric BEH18LM3033MF6D Lexium 18 servo motor with brake, 3 kW, 3000 rpm, 9.8 N.m nominal torque, 16 N.m holding brake, IP67, 17-bit magnetic multi-turn encoder, Asian standard flange.

Schneider Electric BEH18LM3033MF6D datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BEH18LM3033MF6D — Identification
ParameterValue
Product typeServo motor
Holding brakeWith
BEH18LM3033MF6D — Performance
ParameterValue
Nominal torque9.8 N.m, 380 V, three phase
Nominal output power3000 W, 380 V, three phase
Continuous power3000 W
Nominal speed3000 rpm, 380 V, three phase
Maximum mechanical speed3000 rpm
Continuous stall torque9.8 N.m, 380 V, three phase
Peak stall torque29.4 N.m, 380 V, three phase
Holding brake torque16 N.m
Rotor inertia8.22 kg.cm²
BEH18LM3033MF6D — Electrical
ParameterValue
Rated supply voltage (Us)380 V
Network phasesThree phase
Maximum current (Irms)30.39 A at 3 kW, 380 V
Continuous stall current10.13 A
Maximum permanent current30.39 A
Torque constant0.967 N.m/A at 40 °C
Back-EMF constant69.11 V/krpm at 40 °C
Number of motor poles10
Electrical connection2 connectors male/female
BEH18LM3033MF6D — Feedback
ParameterValue
Encoder typeMagnetic encoder
Feedback type17 bits magnetic multi turn encoder
Speed feedback resolution131072 points/turn
BEH18LM3033MF6D — Mechanical
ParameterValue
Shaft end styleParallel key
Shaft diameter28 mm
Shaft length63 mm
Second shaft endWithout second shaft end
Key width8 mm
Motor flange size130 mm
Mounting supportAsian standard flange
Length223.9 mm
Number of mounting holes4
Mounting-hole diameter9 mm
Maximum radial force (Fr)686 N
Maximum axial force (Fa)196 N
Width130 mm
Height174.5 mm
Depth223.9 mm
BEH18LM3033MF6D — Environmental
ParameterValue
IP degree of protectionIP67
Cooling methodAir-cooled

Product details

3 kW, 3000 rpm — operating envelope and brake

The BEH18LM3033MF6D is a 3 kW servo motor from the Lexium 18 family, rated for 3000 rpm nominal speed and 9.8 N.m nominal torque at 380 V three-phase supply. The integrated holding brake delivers 16 N.m holding torque, which secures the load on a vertical axis or during power-off conditions without an external brake resistor.

17-bit absolute encoder — no homing cycle needed

The magnetic multi-turn encoder provides 17-bit absolute position feedback. On power-up the drive reads the absolute position directly, eliminating the homing sequence required by incremental encoders. This reduces cycle time in applications where the machine must resume operation immediately after a power cycle.

IP67 sealed — washdown and wet-area deployment

The motor enclosure carries an IP67 rating, meaning it is dust-tight and protected against temporary immersion in water. This suits food-and-beverage, pharmaceutical, or outdoor conveyor lines where the motor is exposed to hose-down cleaning or rain. The two-connector electrical interface (male/female) maintains the seal when mated.

Frequently asked questions

How do I get current pricing and availability for BEH18LM3033MF6D?

Submit a request with your target quantity and delivery window; the quote will reflect current market conditions through independent distribution channels.

What is BEH18LM3033MF6D's listed depth (223.9 mm) on this Servo Motors with Brake line?

The overall depth of the motor body is 223.9 mm. This dimension excludes the shaft extension and connector protrusion; verify the total installed length against the cabinet depth before mounting.

MPN
BEH18LM3033MF6D