Schneider Electric BEH18MD0233MF5C
MPNBEH18MD0233MF5C
Active
Servo motor BEH18, Lexium 18, 200W, 220V, M60, 17bit, MAG MT, brake
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Magnetic encoder |
| Feedback type | 17 bits magnetic multi turn encoder |
| Product or component type | Servo motor |
| Supply voltage | 220 V |
| Maximum current irms | at 0.2 kW, 220 V |
| Continuous stall current | 1.45 A |
| Maximum permanent current | 4.6 A |
| Continuous power | 200 W |
| Nominal output power | 200 W, 220 V, single phase |
| Number of motor poles | 10 |
| Network number of phases | 3 |
| IP degree of protection | IP67 |
All specifications
| Parameter | Value |
|---|---|
| Mounting support | Asian standard flange |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 5.5 mm |
| Electrical connection | 2 connectors male/female |
| Depth | 70.2 mm |
| Width | 99.7 mm |
| Height | 60 mm |
| Product weight | 1.17 kg |
| Range | Lexium 18 |
| Length | 99.7 mm |
| Shaft end | Parallel key |
| Shaft length | 30.0 mm |
| Holding brake | With |
| Nominal speed | 3000 rpm, 220 V, single phase |
| Rotor inertia | 0.35 kg.cm² |
| Holding torque | 1.27 N.m |
| Nominal torque | 0.64 N.m, 220 V, single phase |
| Shaft diameter | 14.0 mm |
| Torque constant | 0.441 N.m/A at 40 °C |
| Back emf constant | 32 V/krpm at 40 °C |
| Device short name | BEH18 |
| Motor flange size | 60 mm |
| Peak stall torque | 2.24 N.m, 220 V, single phase |
| Maximum axial force fa | 74 N |
| Continuous stall torque | 0.64 N.m, 220 V, single phase |
| Maximum radial force fr | 245 N |
| Maximum mechanical speed | 6000.0 rpm |
| Speed feedback resolution | 131072 points/turn |
| Ambient air temperature for operation | 0...40 °C |
MPN
BEH18MD0233MF5C