400 W servo motor with holding brake for vertical-axis safety
The BEH18MD0433CF5C is a Lexium 18 servo motor delivering 400 W continuous power at 3000 rpm nominal speed from a single-phase 220 V supply. The 1.27 N.m nominal torque matches light-to-medium load applications like pick-and-place or indexing conveyors. The integrated holding brake holds 1.27 N.m with the motor unpowered — critical for vertical-axis loads that must not drift when the drive is off. The brake engages automatically on power loss, meeting safety requirements for Z-axis or gantry applications.
23-bit optic multi-turn encoder — positioning resolution
A 23-bit optic multi-turn encoder provides 8,388,608 counts per revolution absolute position feedback. This resolution supports precise velocity and position loops for applications requiring tight registration or smooth low-speed following error. The optic encoder type gives better accuracy and lower jitter than magnetic alternatives, though it requires a clean environment — the IP67 rating protects the encoder and windings from washdown sprays and dust ingress, making it suitable for food-and-beverage or washdown cells.
Active production — sourcing and lifecycle
The IP67 rating and 60 mm Asian-standard flange mean it drops into existing Lexium 18 installations without mechanical rework. The 14 mm shaft with parallel key and 30 mm shaft length mates with standard couplings and pulleys.