Skip to main content
Log in
Schneider Electric BEH18MF0733CA5C — Servo Motors with Brake

Schneider Electric BEH18MF0733CA5C Servo Motor, 750 W

MPNBEH18MF0733CA5C
Active

Schneider Electric BEH18MF0733CA5C, Lexium 18 servo motor, 750 W, 3000 rpm, 2.39 Nm, 23-bit optic multi-turn encoder, IP67, Asian standard flange.

Schneider Electric BEH18MF0733CA5C datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BEH18MF0733CA5C — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
BEH18MF0733CA5C — Performance
ParameterValue
Nominal torque2.39 N.m, 220 V
Nominal output power750 W, 220 V
Continuous power750 W
Nominal speed3000 rpm, 220 V, single phase
Maximum mechanical speed6000.0 rpm
Continuous stall torque2.39 N.m, 220 V
Peak stall torque8.37 N.m, 220 V
Rotor inertia1.72 kg.cm²
BEH18MF0733CA5C — Electrical
ParameterValue
Rated supply voltage (Us)220 V
Network phases1
Maximum current (Irms)16 A at 0.75 kW, 220 V
Continuous stall current4.7 A
Maximum permanent current16 A
Torque constant0.509 N.m/A at 40 °C
Back-EMF constant34.3 V/krpm at 40 °C
Number of motor poles10
Electrical connection2 connectors male/female
BEH18MF0733CA5C — Feedback
ParameterValue
Encoder typeOptic encoder
Feedback type23 bits optic multi turn encoder
Speed feedback resolution8388608 points/turn
BEH18MF0733CA5C — Mechanical
ParameterValue
Shaft end styleParallel key
Shaft diameter19.0 mm
Shaft length35.0 mm
Second shaft endWithout second shaft end
Key width6.0 mm
Motor flange size80 mm
Mounting supportAsian standard flange
Length94.6 mm
Number of mounting holes4
Mounting-hole bolt circle diameter6.4 mm
Maximum radial force (Fr)392 N
Maximum axial force (Fa)147 N
Width94.6 mm
Height80 mm
Depth89.9 mm
BEH18MF0733CA5C — Environmental
ParameterValue
IP degree of protectionIP67
Cooling methodAir-cooled

Product details

750 W, 3000 rpm — Lexium 18 servo motor with 23-bit optic feedback

The BEH18MF0733CA5C is a 750 W servo motor from the Lexium 18 family, delivering 2.39 Nm nominal torque at 3000 rpm on a single-phase 220 V supply. The 23-bit optic multi-turn encoder provides 8388608 points/turn speed feedback resolution, suitable for closed-loop positioning in pick-and-place or indexing applications.

IP67 enclosure, Asian standard flange, no holding brake

Rated IP67, the motor body withstands washdown environments — the sealing is at the housing and connector interface, not the shaft seal. The 80 mm Asian standard flange (4 mounting holes) and 19 mm shaft with parallel key match common mounting patterns in packaging and material-handling equipment. No holding brake is fitted (: Without), so the load must be held by the drive's holding torque or an external brake when power is off.

MPN
BEH18MF0733CA5C