What the torque and speed ratings mean for the machine
The BEH18MM1313CA6D delivers 8.34 Nm nominal torque at 1500 rpm on 380 V three-phase — that's the continuous-duty point where the motor can run all day without overheating. Peak stall torque hits 25.02 Nm, which handles short-duration acceleration or load transients, but the drive must limit the current to 14.91 A to stay within the winding thermal limits. Maximum mechanical speed is 3000 rpm, so there's headroom above the 1500 rpm base for applications that need a quick traverse or spindle run-up. The 10-pole design gives a lower base speed for direct-drive torque without a gearbox.
Feedback, mounting, and environmental fit
The 23-bit optic multi-turn encoder gives 8,388,608 counts per revolution — that's enough resolution for positioning down to arc-seconds with a matching drive. No holding brake on this variant, so vertical-axis loads need an external brake or a motor with the brake option. IP67 means the motor body and shaft seal handle washdown — suitable for food, beverage, or wet process lines where hosing down the machine is routine. The Asian standard flange with 130 mm square pattern and 4 mounting holes bolts to common machine frames.