Frame dimensions and mounting
The BEH18MM1313CF6C uses a 130 mm Asian-standard flange with four mounting holes. Shaft is 22.0 mm diameter, 58.0 mm long with a parallel key (8.0 mm key width). No second shaft end, so no provision for an external encoder or brake on the rear.
Torque and speed profile
Rated for 1.3 kW continuous output at 220 V single-phase, with a nominal speed of 1500 rpm and a maximum mechanical speed of 3000 rpm. Nominal torque is 8.34 N.m at 220 V; continuous stall torque matches that figure, so the motor can hold full rated torque at zero speed without overheating. Peak stall torque reaches 25.02 N.m at 220 V — useful for short-duration acceleration or overcoming static friction. The holding brake delivers 16.0 N.m, which is nearly double the nominal torque, so it holds the load securely when power is removed.
Feedback and environmental sealing
Feedback comes from a 23-bit optic multi-turn encoder — 23 bits per revolution gives 8,388,608 counts per turn, with multi-turn tracking over 4096 revolutions. That resolution suits applications needing precise position repeatability, like pick-and-place or rotary indexing tables.
Electrical and thermal parameters
Continuous stall current is 9.4 A; maximum permanent current is 27 A. The torque constant is 0.887 N.m/A at 40 °C, and the back EMF constant is 63.21 V/krpm at the same temperature — useful for estimating drive voltage requirements at higher speeds.