1.3 kW, 8.34 Nm — the load-fit numbers
The BEH18MM1313MA6C is a 1.3 kW servo motor from the Lexium 18 family, delivering 8.34 Nm nominal torque at 1500 rpm on a 220 V single-phase supply. Peak stall torque reaches 25.02 Nm under the same conditions, giving headroom for acceleration transients without oversizing the frame. Continuous stall current is 9.4 A; maximum permanent current is 27 A. The torque constant of 0.887 N.m/A at 40 °C lets you estimate current draw for a given load torque — useful when sizing the drive's continuous and peak current ratings.
IP67, 17-bit encoder, Asian flange
Rated IP67, so the motor body and shaft seal withstand washdown environments — suitable for food processing or wet machining lines where hose-down cleaning is routine. The 17-bit magnetic multi-turn encoder provides 131072 points per turn, giving fine position feedback for closed-loop speed and torque control. Mounting uses an Asian standard flange with a 130 mm flange size and four mounting holes. The shaft is 22 mm diameter with a parallel key, 58.0 mm shaft length. Physical envelope: 152.6 mm width, 130 mm height, 174.5 mm depth — confirm the mounting footprint against the machine frame before integration.