Dimensions and mounting — Asian standard flange, 130 mm
The BEH18MM1313MF6D carries a 130 mm Asian standard flange with four mounting holes. Shaft is 22.0 mm diameter with a 58.0 mm length and an 8.0 mm parallel key. No second shaft end.
Torque and speed profile — 8.34 N.m continuous, 1500 rpm base
Nominal torque is 8.34 N.m at 380 V three-phase, with a continuous stall torque matching that figure. Peak stall torque reaches 25.02 N.m — useful for acceleration transients but thermally limited. Nominal speed is 1500 rpm; maximum mechanical speed is 3000 rpm. The torque constant is 1.678 N.m/A at 40 °C, and the back EMF constant is 110.2 V/krpm at 40 °C.
Electrical and environmental — IP67, air-cooled, 14.91 A peak
Continuous power is 1.3 kW at 380 V three-phase. Continuous stall current is 4.97 A; maximum permanent current (peak) is 14.91 A. The motor is air-cooled and carries IP67 protection — the housing and connector seal withstands washdown and dust ingress. Electrical connection uses two male/female connectors. Maximum radial force on the shaft is 686 N; maximum axial force is 196 N.