1.5 kW at 2000 rpm — torque and speed for medium-duty axes
The BEH18MM1523MA6C delivers 1.5 kW nominal output power at 220 V single-phase, with a nominal speed of 2000 rpm. Continuous stall torque is 7.16 N.m at 220 V, and peak stall torque reaches 21.48 N.m — enough for acceleration and load transients in pick-and-place or indexing applications. The 17-bit magnetic multi-turn encoder provides 131072 points per turn of absolute position feedback, eliminating the need for a homing cycle on power-up.
IP67 sealed — washdown-ready without a brake
This variant ships without a holding brake, so the load must be held externally (e.g., by the drive's DC injection or a mechanical brake on the axis) when power is removed.
Mounting and mechanical interface — Asian standard flange
The motor uses an Asian standard flange with a 130 mm flange size and four mounting holes, matching the common 130 mm frame footprint for direct coupling to gearboxes or pulleys. The shaft is 22.0 mm diameter with a 58.0 mm length and a parallel key (key width 8.0 mm) — standard for this power class. Overall dimensions are 152.6 mm width, 130 mm height, and 174.5 mm depth — account for the connector protrusion and cable bend radius in the enclosure layout.