The BEH18MM2023CF6D: Rated 2000 W continuous power at 380 V three-phase, with a nominal speed of 2000 rpm and nominal torque of 9.55 N.m. Peak stall torque reaches 28.65 N.m — that's the short-duration acceleration headroom for fast indexing or overcoming breakaway friction. The 23-bit optic multi-turn encoder gives 8,388,608 counts per revolution absolute position. No homing routine needed on power-up if the drive supports multi-turn absolute — the motor knows where the axis is after a cycle loss.
Holding brake and IP67 — field-fit for washdown and vertical loads
Integral holding brake rated at 16 N.m static torque. On a vertical axis that brake holds the load when power drops — no external mechanical brake needed, but confirm the brake release time in the drive parameter matches the application to avoid a drop on power-up. IP67 protection means the motor body and shaft seal are dust-tight and withstand temporary immersion. Fine for washdown zones in food processing or outdoor conveyors — just verify the cable gland and mating connector are also rated IP67.