Active production — a 2 kW servo for washdown lines
The BEH18MM2023MA6D: Rated 2 kW continuous power at 380 V three-phase, with a nominal speed of 2000 rpm and a continuous stall torque of 9.55 N.m. The peak stall torque reaches 28.65 N.m, giving a 3× overload margin for acceleration and deceleration cycles — useful for indexing or high-inertia loads. The sealing is on the connector O-ring, not just the housing thread.
Feedback and mechanical fit
The 17-bit magnetic multi-turn encoder provides 131,072 counts per revolution with absolute position tracking over multiple turns — no need for a home cycle after power loss. This suits applications requiring precise positioning without a separate battery-backed encoder.
Electrical ratings and thermal limits
Continuous stall current is 5.84 A; the maximum permanent (peak) current is 17.51 A at 2.0 kW, 380 V. The torque constant is 1.635 N.m/A at 40 °C, and the back EMF constant is 110.11 V/krpm at 40 °C — these values let you calculate the drive voltage and current requirements for a given torque-speed profile. The motor has 10 poles and is air-cooled. Maximum mechanical speed is 3000 rpm, so the nominal 2000 rpm leaves headroom for field weakening if the load requires higher speed at reduced torque. Maximum axial force is 196 N; maximum radial force is 686 N — stay within these limits to avoid bearing overload. No holding brake is fitted on this variant — the BEH18MM2023MA6D relies on the drive's holding torque or an external brake for vertical-axis loads. If your application requires a brake, this is the version to specify without one.
Sourcing — quoted to order, current production
The 2 kW power class and 130 mm flange match common machine-building footprints in packaging, material handling, and food processing.