2400 W continuous power, 15.28 N.m nominal torque
The BEH18MR2413CF6C is a 2400 W servo motor from the Lexium 18 range, delivering 15.28 N.m nominal torque at 220 V. The 23-bit optic multi-turn encoder provides absolute position feedback, eliminating the need for a home cycle on power-up — the drive knows the shaft position from the last active state. The holding brake is integrated, rated at 50 N.m holding torque. This means the motor holds the load in position when power is removed — no external brake resistor or mechanical lock needed for vertical-axis or gravity-loaded applications. The motor flange is 180 mm (Asian standard), with a 35 mm shaft diameter and parallel key. The 226.5 mm depth and 217.5 mm width/height define the envelope — measure the available cavity before committing the BOM.
IP67, 3000 rpm max, 46.7 A peak
IP67 rating means the motor body is sealed against dust and water ingress — suitable for washdown environments in food processing, packaging, or outdoor conveyor lines. The connectors (2 male/female) are the wet-end interface; ensure the mating cordset is also IP67-rated to maintain the seal. Peak stall torque is 45.84 N.m at 220 V, with a maximum permanent current of 46.7 A. The continuous stall current is 15.6 A — this is the current the motor can sustain indefinitely without overheating. The drive must be sized to supply the peak current during acceleration and the continuous current during steady-state operation.
The motor carries a 23-bit optic multi-turn encoder — this is a high-resolution feedback device. For applications requiring SIL-rated safety functions (STO, SS1), confirm the drive and encoder combination supports the safety protocol; the encoder itself is not a safety-rated device unless paired with a compatible safety drive.