Motor sizing and load fit for the BEH18MR2413MF6C
This is a 2.4 kW continuous power servo motor from the Lexium 18 family, delivering 15.28 N.m nominal torque and 45.84 N.m peak stall torque at 220 V. The 1500 rpm nominal speed with a 3000 rpm mechanical max means it suits direct-drive or low-ratio applications where you need torque density without a gearbox. Feedback comes from a 17-bit magnetic multi-turn encoder — 131,072 counts per revolution with multi-turn position tracking. That's enough for most positioning applications without needing a separate absolute encoder interface.
Mounting, shaft, and environmental sealing
The motor flange is 180 mm (Asian standard), with four mounting holes. The shaft is 35 mm diameter with a parallel key (10 mm key width) and 79 mm shaft length. No second shaft end — so no room for an external encoder or brake on the rear side without a custom adapter. IP67 rating on the motor body means it handles washdown — suitable for food-and-beverage lines where you hose down the machine between batches. The two-connector electrical interface (male/female) keeps the cable entry sealed when mated. Overall dimensions: 217.5 mm wide, 180 mm high, 226.5 mm deep. That's a compact package for a 2.4 kW motor with brake — check your enclosure clearance before committing the panel layout.
Sourcing and lifecycle — current production, quoted to order
This is a fast mover in the Lexium 18 range — the 2.4 kW size with brake covers a lot of common axis applications.