2.9 kW, 1500 rpm — torque and speed envelope
The BEH18MR2913CF6D delivers 2.9 kW nominal output power at 1500 rpm on a 380 V three-phase supply, with a nominal torque of 18.46 N.m and a peak stall torque of 55.38 N.m. That peak torque handles short-duration overloads during acceleration or reversing without tripping the drive. Maximum mechanical speed is 3000 rpm, so the motor can run up to double the nominal speed for high-speed moves, though torque drops off above base speed.
23-bit optic multi-turn encoder — position feedback for closed-loop control
The built-in 23-bit optic multi-turn encoder gives 8,388,608 counts per revolution and tracks absolute position over multiple turns. No home-find sequence needed after a power cycle — the drive knows the shaft position on boot.
Holding brake and IP67 — vertical-axis and washdown ready
The holding brake delivers 50 N.m of holding torque, enough to lock a vertical load in place when the drive is disabled. The motor carries an IP67 rating, so the housing and shaft seal tolerate washdown, coolant spray, and dusty environments common in food, packaging, and machine-tool cells.
Mounting and mechanical interface
The motor uses an Asian standard flange with a 180 mm flange size and four mounting holes. The shaft is 35 mm diameter with a 79 mm length and a 10 mm parallel key — standard for coupling to a load through a bell housing or direct mount.