Skip to main content
Log in
Schneider Electric BMED581020C

Schneider BMED581020C Modicon M580 dPAC, Conformal Coated

MPNBMED581020C
Active

Schneider Electric Modicon M580 dPAC processor module, conformal coated, CE, UL 61010-2-201, active, 295 mA 24 V DC, 64 MB RAM.

Schneider Electric BMED581020C datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMED581020C key specifications
ParameterValue
Range of productModicon M580
Product or component typeProcessor module
Integrated connection type1 Ethernet TCP/IP service port 2 Ethernet TCP/IP device network
Current consumption295 mA 24 V DC
IP degree of protectionIP20
Shock resistance30 gn
Relative humidity5...95 % 131 °F (55 °C) without condensation
Operating altitude0...6561.68 ft (0...2000 m) 2000...5000 m with derating factor
Vibration resistance3 gn
MTBF reliability600000 H
StandardsIEC 61131-2 IEC 61010-2-201 UL 61010-2-201 IACS E10
SupplyInternal power supply via rack

All specifications

BMED581020C additional specifications
ParameterValue
MarkingCE
CategoryUS1PC1522555
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2006/42/EC - machinery
Status LED1 LED (Green) processor running (RUN) 1 LED (Red) processor or system fault (ERR) 1 LED (Red) I/O module fault (I/O) 1 LED (Green) download in progress (DL) 1 LED (Red) I/O values overrided by user (FORCED IO) 1 LED (green/red) ETH MS (Ethernet port configuration status) 1 LED (green/red) Eth NS (Ethernet network status)
Number of racks4
Memory descriptionIntegrated RAM, 64 MB program and data
Environmental characteristicHazardous location class I division 2
Number of distributed equipment64
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Ambient air temperature for operation32...140 °F (0...60 °C)

Product details

Commissioning note for process environments

The BMED581020C is a Modicon M580 dPAC processor module with conformal coating, meaning it's built for environments where atmospheric contaminants or humidity would attack a standard board. Fits the SIS architecture or continuous process line where corrosion resistance matters: the coating protects against conductive dust and condensation, and the unit carries a Class I Division 2 hazardous location listing. Rack-powered at 295 mA from the backplane, so no separate power connection needed at the processor slot. Memory is 64 MB integrated RAM for program and data — enough for a medium-to-large control strategy with multiple distributed equipment nodes (up to 64 per the spec). The processor supports up to four racks via the M580 remote I/O bus. Status LEDs, including separate running/fault indicators, simplify startup and troubleshooting on the panel.

Frequently asked questions

What is the supply voltage requirement for BMED581020C?

The module is powered via the rack backplane; it draws 295 mA at 24 V DC. No external power supply connection is needed at the processor slot.

What compliance documentation is available for BMED581020C?

The module carries CE marking, UL 61010-2-201, IEC 61131-2, IEC 61010-2-201, and IACS. It also complies with the EU low-voltage (2014/35/EU), EMC (2014/30/EU), and machinery (2006/42/EC) directives. Hazardous location rating Class I Division 2 is listed.

What is the memory capacity of this processor?

The BMED581020C has 64 MB of integrated RAM for program and data storage, suitable for mid-size control applications without needing an additional memory card.

MPN
BMED581020C