Schneider Electric BMH1003T16A2A
MPNBMH1003T16A2A
Active
servo motor BMH, Lexium 32, 8.2Nm, 6000rpm, keyed shaft, without brake, IP54, 16bit encoder
$681.99 – $1,560.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 240 V |
| Maximum current irms | 34.7 A LXM32.D30M2 |
| Output current 3s peak | 34.7 A |
| Continuous stall current | 10 A |
| Maximum permanent current | 33.85 A |
| Continuous power | 2.62 W |
| Nominal output power | 1450 W LXM32.D30M2 10 A, 230 V, single phase |
| Number of motor poles | 5.0 |
| Phases | Three phase |
All specifications
| Parameter | Value |
|---|---|
| Network number of phases | 3 |
| IP degree of protection | IP54 standard |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.4 in (9 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 4.5 in (115 mm) |
| Electrical connection | Rotatable right-angled connectors |
| Key width | 1.2 in (30 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Length | 7.6 in (192.6 mm) |
| Inertia | 0.0 kg.cm² of brake 9.371 kg.cm² of motor |
| Category | US1PC5318282 |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft length | 1.6 in (40 mm) |
| Holding brake | Without |
| Nominal speed | 2500 rpm LXM32.D30M2 10 A, 230 V, single phase |
| Rotor inertia | 9.37 kg.cm² |
| Nominal torque | 49.6 lbf.in (5.6 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Shaft diameter | 0.7 in (19 mm) |
| Torque constant | 0.82 N.m/A 248 °F (120 °C) |
| Sizing reference | BMH1003T |
| Back emf constant | 54.8 V/krpm 248 °F (120 °C) |
| Device short name | BMH |
| Motor flange size | 3.9 in (100 mm) |
| Peak stall torque | 201.8 lbf.in (22.8 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Stator inductance | 1.355 mH 68 °F (20 °C) |
| Stator resistance | 0.47 Ohm 68 °F (20 °C) |
| Temperature magnet rt | 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 3 |
| Temperature copper hot | 275 °F (135 °C) |
| Temperature magnet hot | 212 °F (100 °C) |
| Continuous stall torque | 72.6 lbf.in (8.2 N.m) LXM32.D30M2 10 A, 230 V, single phase |
| Maximum radial force fr | 1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm |
| Accuracy error [angular] | 4.8 ° |
| Centring collar diameter | 3.7 in (95 mm) |
| Maximum mechanical speed | 6000 rpm |
| Speed feedback resolution | 32768 points/turn |
| Stator electrical time constant | 6.4 ms 68 °F (20 °C) |
MPN
BMH1003T16A2A