Schneider Electric Lexium 32 BMH1401P06F1A servo motor, 10.3 N.m nominal torque, 1450 W, 4000 rpm max, 480 V three-phase, IP54, SinCos Hiperface encoder, smooth shaft, with holding brake, 10 poles.
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 480 V |
| Maximum current irms | 29.8 A LXM32.D30M2 29.8 A LXM32.D30N4 |
| Continuous stall current | 8.58 A |
| Maximum permanent current | 29.8 A |
| Continuous power | 2.85 W |
| Brake pull-in power | 18 W |
| Nominal output power | 1450 W LXM32.D30M2 10 A, 230 V, single phase 2400 W LXM32.D30N4 10 A, 400 V, three phase 2400 W LXM32.D30N4 10 A, 480 V, three phase |
| Number of motor poles | 10 |
| Phases | Three phase |
| Parameter | Value |
|---|---|
| Network number of phases | 3 |
| IP degree of protection | IP54 standard |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.4 in (11 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 6.5 in (165 mm) |
| Electrical connection | Straight connectors |
| Centring collar depth | 0.1 in (3.5 mm) |
| Length | 7.4 in (187 mm) |
| Category | US1PC5318282 |
| Shaft end | Smooth shaft |
| Second shaft | Without second shaft end |
| Shaft length | 2.0 in (50 mm) |
| Holding brake | With |
| Nominal speed | 2000 rpm LXM32.D30M2 10 A, 230 V, single phase 3000 rpm LXM32.D30N4 10 A, 400 V, three phase 3000 rpm LXM32.D30N4 10 A, 480 V, three phase |
| Rotor inertia | 17.96 kg.cm² |
| Holding torque | 159.3 lbf.in (18 N.m) holding brake |
| Nominal torque | 61.07 lbf.in (6.9 N.m) LXM32.D30M2 10 A, 230 V, single phase 68.2 lbf.in (7.7 N.m) LXM32.D30N4 10 A, 400 V, three phase 68.2 lbf.in (7.7 N.m) LXM32.D30N4 10 A, 480 V, three phase |
| Shaft diameter | 0.9 in (24 mm) |
| Torque constant | 1.2 N.m/A 248 °F (120 °C) |
| Sizing reference | BMH1401P |
| Back emf constant | 77.4 V/krpm 248 °F (120 °C) |
| Device short name | BMH |
| Motor flange size | 5.5 in (140 mm) |
| Peak stall torque | 272.6 lbf.in (30.8 N.m) LXM32.D30M2 10 A, 230 V, single phase 272.6 lbf.in (30.8 N.m) LXM32.D30N4 10 A, 400 V, three phase 272.6 lbf.in (30.8 N.m) LXM32.D30N4 10 A, 480 V, three phase |
| Stator inductance | 6.7 mH 68 °F (20 °C) |
| Stator resistance | 0.69 Ohm 68 °F (20 °C) |
| Temperature magnet rt | 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 1 |
| Temperature copper hot | 275 °F (135 °C) |
| Temperature magnet hot | 212 °F (100 °C) |
| Continuous stall torque | 91.2 lbf.in (10.3 N.m) LXM32.D30M2 10 A, 230 V, single phase 91.2 lbf.in (10.3 N.m) LXM32.D30N4 10 A, 400 V, three phase 91.2 lbf.in (10.3 N.m) LXM32.D30N4 10 A, 480 V, three phase |
| Maximum radial force fr | 1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm |
| Accuracy error [angular] | 4.8 ° |
| Centring collar diameter | 5.1 in (130 mm) |
| Maximum mechanical speed | 4000 rpm |
| Speed feedback resolution | 32768 points/turn |
| Stator electrical time constant | 9.7 ms 68 °F (20 °C) |
The BMH1401P06F1A is a 10-pole, three-phase Lexium 32 servo motor rated for 10.3 N.m continuous torque at 1450 W, with a 4000 rpm top speed and an IP54 sealed housing. It carries a single-turn SinCos Hiperface encoder resolving 32768 points per turn, includes a holding brake, and is matched to the LXM32.D30N4 drive on 400 to 480 V three-phase supply.
No related articles