Schneider BMH1402P02F1A Square D Servo Motor — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Feedback type | Multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 480 V |
| Maximum current irms | 57.4 A LXM32.D72N4 |
| Continuous stall current | 16.83 A |
| Maximum permanent current | 57.4 A |
| Continuous power | 4.44 W |
| Brake pull-in power | 18 W |
| Nominal output power | 3500 W LXM32.D72N4 24 A, 400 V, three phase 3500 W LXM32.D72N4 24 A, 480 V, three phase |
| Number of motor poles | 10 |
| Phases | Three phase |
| Parameter | Value |
|---|---|
| Network number of phases | 3 |
| IP degree of protection | IP54 standard |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.4 in (11 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 6.5 in (165 mm) |
| Electrical connection | Straight connectors |
| Centring collar depth | 0.1 in (3.5 mm) |
| Length | 8.9 in (227 mm) |
| Category | US1PC5318282 |
| Shaft end | Smooth shaft |
| Second shaft | Without second shaft end |
| Shaft length | 2.0 in (50 mm) |
| Holding brake | With |
| Nominal speed | 3000 rpm LXM32.D72N4 24 A, 400 V, three phase 3000 rpm LXM32.D72N4 24 A, 480 V, three phase |
| Rotor inertia | 33.5 kg.cm² |
| Holding torque | 159.3 lbf.in (18 N.m) holding brake |
| Nominal torque | 108.0 lbf.in (12.2 N.m) LXM32.D72N4 24 A, 400 V, three phase 108.0 lbf.in (12.2 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Shaft diameter | 0.9 in (24 mm) |
| Torque constant | 1.1 N.m/A 248 °F (120 °C) |
| Sizing reference | BMH1402P |
| Back emf constant | 70.7 V/krpm 248 °F (120 °C) |
| Device short name | BMH |
| Motor flange size | 5.5 in (140 mm) |
| Peak stall torque | 445.2 lbf.in (50.3 N.m) LXM32.D72N4 24 A, 400 V, three phase 445.2 lbf.in (50.3 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Stator inductance | 3 mH 68 °F (20 °C) |
| Stator resistance | 0.23 Ohm 68 °F (20 °C) |
| Temperature magnet rt | 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 2 |
| Temperature copper hot | 275 °F (135 °C) |
| Temperature magnet hot | 212 °F (100 °C) |
| Continuous stall torque | 163.7 lbf.in (18.5 N.m) LXM32.D72N4 24 A, 400 V, three phase 163.7 lbf.in (18.5 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Maximum radial force fr | 2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm |
| Accuracy error [angular] | 1.4 ° |
| Centring collar diameter | 5.1 in (130 mm) |
| Maximum mechanical speed | 4000 rpm |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Stator electrical time constant | 13 ms 68 °F (20 °C) |
The BMH1402P02F1A is a 10-pole servo motor in the Schneider Lexium 32 BMH frame, delivering 18.5 N.m continuous torque and 3500 W mechanical output at 4000 rpm on a 480 V three-phase supply. It carries a Multiturn SinCos Hiperface feedback encoder resolving 131072 points per turn over 4096 turns, a holding brake for vertical-axis loads, and is sealed to IP54 with a smooth shaft.
No related articles