Skip to main content
Log in
Schneider Electric BMI0702P01A

BMI0702P01A Servo Motor, Three-Phase, 1800–4400 rpm, Hiperfa

MPNBMI0702P01A
Active

Bosch Rexroth BMI0702P01A three-phase servo motor, 1800–4400 rpm, 2.4 Nm, absolute single-turn Hiperface SinCos feedback, IP54/IP65.

$2,240.00Ref. price · indicative, final on quote
Schneider Electric BMI0702P01A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0702P01A key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Nominal output power400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0702P01A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length10.6 in (268 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWithout
Nominal speed1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase
Rotor inertia1.13 kg.cm²
Nominal torque21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant1.15 N.m/A 68 °F (20 °C)
Back emf constant77.18 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase
Stator inductance25.75 mH 68 °F (20 °C)
Stator resistance8.89 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 208...480 V three phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.9 ms 68 °F (20 °C)

Product details

Part and key specs at a glance

It delivers nominal torque from 2.4 Nm down to 2 Nm depending on supply voltage (208–480 V three-phase), with peak stall torque of 6.8 Nm across that range. The stator resistance is 8.89 Ω and inductance 25.75 mH, giving a torque constant of 1.15 Nm/A at 20 °C.

Feedback, mounting, and environmental fit

Feedback is an absolute single-turn SinCos Hiperface encoder — no homing sequence required after power loss, which simplifies commutation resync. The motor mounts to an international standard flange (70 mm pilot diameter, 60 mm centring collar, 5.5 mm bolt holes). It is naturally convectively cooled and carries IP54 on the shaft, IP65 on the housing; that keeps it suitable for most machine-tool and packaging environments without external fan or sealed enclosure.

Frequently asked questions

What is BMI0702P01A's listed phase?

Three phase operation, compatible with 208–480 V three-phase supplies.

What is BMI0702P01A's listed length?

10.6 inches (268 mm) overall length.

MPN
BMI0702P01A