Servomotor fit
The BMI0702P01F is a three-phase servomotor delivering 400 W at 208 V, 800 W at 400 V, and 900 W at 480 V three-phase supplies, with nominal speeds of 1800, 3600, and 4400 rpm respectively. Nominal torque ranges from 2.0 Nm at 480 V to 2.4 Nm at 208 V, and the holding brake holds 3 Nm static — sufficient for vertical-axis loads when power is removed. Feedback is an absolute single-turn SinCos Hiperface encoder, giving motion controllers exact position on power-up without a homing cycle. Integrated EMC filter covers conducted emissions; an external filter is not required.
Mounting and interface
Flange is an international standard 70 mm (2.8 in) with a centring collar depth of 2.5 mm. Shaft diameter 11 mm, shaft length 23 mm, untapped — no through-hole for a bolt. Electrical connection via printed circuit board connector; no pre-wired pigtail. Natural convection cooling — no fan, but derate if enclosed in a sealed cabinet near other heat sources.