BMI0702P17F is a 10-pole, 2-stack synchronous servo motor. At 208 V three-phase it delivers 400 W and 2.4 Nm; at 400 V, 800 W and 2.2 Nm; at 480 V, 900 W and 2.0 Nm. Nominal speed ranges from 1800 rpm at 208 V up to 4400 rpm at 480 V. Peak stall torque holds 6.8 Nm across all voltages. The motor is cooled by natural convection – no fan to fail. Feedback is absolute multiturn SinCos Hiperface so the drive knows shaft position at power-up without a home cycle. Integrated holding brake holds 3 Nm with 5 W pull-in power – important for vertical-axis or safety-holding applications. Shaft is 11 mm diameter, keyed, with IP54 housing and IP65 overall. Motor flange is 70 mm international standard; centring collar depth 2.5 mm.
Schneider BMI0702P17F servo motor, 400 W, holding brake
MPNBMI0702P17F
Active
Schneider Electric BMI0702P17F servo motor, BMI series, three-phase, 208-480 V, 400 W, with holding brake and absolute multiturn Hiperface encoder.
$990.60 – $1,780.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →Specifications
| Parameter | Value |
|---|---|
| Feedback type | Absolute multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor with power stage |
| Supply voltage limits | 208...480 V |
| Supply voltage | 208...480 V - 15...10 % |
| Maximum current irms | 9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase |
| Output current 3s peak | 6 A 400 V 3 s |
| Continuous stall current | 2 A |
| Continuous output current | 2 A 8 kHz |
| Brake pull-in power | 5 W |
| Nominal output power | 400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase |
| Supply frequency | 50/60 Hz - 5...5 % |
All specifications
| Parameter | Value |
|---|---|
| Network frequency limits | 47.5...63 Hz |
| Number of motor poles | 10 |
| Phases | Three phase |
| IP degree of protection | Shaft IP54 Housing IP65 |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.2 in (5.5 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 3.0...3.2 in (75...82 mm) |
| Electrical connection | Printed circuit board connector |
| EMC filter | Integrated |
| Key width | 0.2 in (4 mm) |
| Centring collar depth | 0.10 in (2.5 mm) |
| Length | 12.05 in (306 mm) |
| Category | US1PC5618287 |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft length | 0.9 in (23 mm) |
| Holding brake | With |
| Nominal speed | 1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase |
| Rotor inertia | 1.24 kg.cm² |
| Holding torque | 26.6 lbf.in (3 N.m) holding brake |
| Nominal torque | 21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase |
| Shaft diameter | 0.4 in (11 mm) |
| Torque constant | 1.15 N.m/A 68 °F (20 °C) |
| Back emf constant | 77.18 V/krpm 68 °F (20 °C) |
| Device short name | BMI |
| Motor flange size | 2.8 in (70 mm) |
| Peak stall torque | 60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase |
| Stator inductance | 25.75 mH 68 °F (20 °C) |
| Stator resistance | 8.89 Ohm 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 2 |
| Continuous stall torque | 21.95 lbf.in (2.48 N.m) 208...480 V three phase |
| Maximum radial force fr | 710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm |
| Centring collar diameter | 2.4 in (60 mm) |
| Maximum mechanical speed | 8000 rpm |
| Speed feedback resolution | 32768 points/turn x 4096 turns |
| Distance shaft shoulder-flange | 0.10 in (2.5 mm) |
| Stator electrical time constant | 2.9 ms 68 °F (20 °C) |
Product details
Frequently asked questions
What is the listed phase of BMI0702P17F?
Three phase.
What is the length of BMI0702P17F?
12.05 in (306 mm).
MPN
BMI0702P17F