Skip to main content
Log in
Schneider Electric BMI0702P36F

BMI0702P36F Servo Motor, 70mm Flange, Hiperface, Holding Bra

MPNBMI0702P36F
Obsolete

Schneider Electric BMI series servo motor, BMI0702P36F, three phase 208-480 V, 70 mm flange, keyed shaft, absolute single-turn SinCos Hiperface feedback, holding brake, IP65.

Schneider Electric BMI0702P36F datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0702P36F key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Brake pull-in power5 W
Nominal output power400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0702P36F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (4 mm)
Centring collar depth0.10 in (2.5 mm)
Length12.05 in (306 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWith
Nominal speed1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase
Rotor inertia1.24 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant1.15 N.m/A 68 °F (20 °C)
Back emf constant77.18 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase
Stator inductance25.75 mH 68 °F (20 °C)
Stator resistance8.89 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 208...480 V three phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution32768 points/turn
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.9 ms 68 °F (20 °C)

Product details

The BMI0702P36F is a 10-pole, 2-stack servo motor from Schneider's BMI compact series. Rated for 208-480 V three-phase supply, it delivers 400 W at 208 V, 800 W at 400 V, and 900 W at 480 V. The motor carries a holding brake (3 N.m holding torque) and an absolute single-turn SinCos Hiperface encoder, suiting it for positioning applications that retain zero after power loss. The standard flange measures 70 mm with a 2.5 mm centring collar depth. The shaft is keyed, 11 mm diameter and 23 mm long. The unit is IP65-rated and cooled by natural convection, so panel layout must allow free airflow.

Mounting & Electrical Connection

Flange size is 70 mm with a 2.5 mm centring collar depth; electrical connection uses a PCB connector. Single-ended shaft has a 4 mm key width; holding brake requires 5 W pull-in and delivers 3 N.m; IP65.

MPN
BMI0702P36F