Skip to main content
Log in
Schneider Electric BMI0702P37F

Schneider BMI0702P37F Servo Motor, 900W, IP65

MPNBMI0702P37F
Active

Schneider BMI0702P37F servo motor, three-phase, 208-480 V, 900 W at 480 V, IP65, with holding brake and absolute multiturn SinCos Hiperface feedback.

$2,710.00Ref. price · indicative, final on quote
Schneider Electric BMI0702P37F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0702P37F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Brake pull-in power5 W
Nominal output power400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0702P37F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (4 mm)
Centring collar depth0.10 in (2.5 mm)
Length12.05 in (306 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWith
Nominal speed1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase
Rotor inertia1.24 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant1.15 N.m/A 68 °F (20 °C)
Back emf constant77.18 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase
Stator inductance25.75 mH 68 °F (20 °C)
Stator resistance8.89 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 208...480 V three phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.9 ms 68 °F (20 °C)

Product details

The Schneider BMI0702P37F is a three-phase servo motor from the BMI series. It handles supply voltages from 208 to 480 V and puts out 400 W on 208 V, 800 W on 400 V, or 900 W on 480 V. It's built with a holding brake, absolute multiturn SinCos Hiperface feedback, and an integrated EMC filter, all sealed to IP65.

Mounting and mechanicals

Shaft is 11 mm diameter with a keyed end, 23 mm long. The flange is international standard at 70 mm with a centring collar depth of 2.5 mm, so it'll bolt to a standard mount without a custom adapter. Motor body length is 12.05 in (306 mm). Out here in the grease, the IP65 rating means you can hose this motor down without pulling it. Natural convection cooling — no fan to clog with dust or lint — and the holding brake pulls only 5 W to hold 3 N·m.

Sourcing

This BMI0702P37F is a current-production part. If you're filling a BOM or keeping a line running, it's available through standard supply. Drop us an RFQ and we'll confirm fit against your voltage and torque needs.

Frequently asked questions

What are the key electrical ratings?

It's a three-phase motor accepting 208 to 480 V, 50/60 Hz. Output power ranges from 400 W to 900 W depending on line voltage. Continuous stall torque is 2.48 N·m across the voltage range.

What feedback does it use?

Absolute multiturn SinCos Hiperface. That's a digital encoder for position and speed feedback.

What protection rating does it have?

IP65, so dust-tight and protected against water jets.

MPN
BMI0702P37F