Skip to main content
Log in
Schneider Electric BMI0702T01F

Bosch Rexroth BMI0702T01F Servo Motor, 4000 rpm, Single Phas

MPNBMI0702T01F
Active

Bosch Rexroth BMI0702T01F, Single-phase servo motor, 4000 rpm, 700 W at 230 V, with integrated holding brake, Hiperface absolute single-turn feedback, and EMC filter.

Schneider Electric BMI0702T01F datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0702T01F key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.7 A 230 V, single phase 17.7 A 115 V, single phase
Output current 3s peak10.5 A 230 V 1 s
Continuous stall current2.6 A
Continuous output current2.6 A 8 kHz
Brake pull-in power5 W
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0702T01F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length12.05 in (306 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWith
Nominal speed4000 rpm 230 V single phase 1700 rpm 115 V single phase
Rotor inertia1.24 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase
Shaft diameter0.4 in (11 mm)
Torque constant0.63 N.m/A 68 °F (20 °C)
Back emf constant42.1 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase
Stator inductance7.8 mH 68 °F (20 °C)
Stator resistance2.7 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 115...230 V single phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.89 ms 68 °F (20 °C)

Product details

The Bosch Rexroth BMI0702T01F is a single-phase servo motor designed for 100...240 VAC supply. At 230 V it delivers 700 W nominal output and 4000 rpm; at 115 V the output drops to 400 W and 1700 rpm. The integrated holding brake provides 3 Nm of holding torque, and the Hiperface absolute single-turn SinCos feedback gives position data for closed-loop control. The motor is rated IP54 on the shaft and IP65 on the housing, with natural convection cooling — no fan, so duty cycle may be limited under continuous heavy load.

Ratings in context

The holding brake draws 5 W pull-in power and is rated for 3 Nm static holding torque. This is sufficient for vertical-axis loads within the motor's torque range, but dynamic braking should be handled by the drive's braking resistor — the brake is a holding brake, not a dynamic stop brake.

Frequently asked questions

What is the phase configuration of this motor?

It is a single-phase motor, designed for 100...240 V single-phase AC supply.

What is the physical length of this motor?

The length is 12.05 inches (306 mm).

MPN
BMI0702T01F