Skip to main content
Log in
Schneider Electric BMI0702T02F

Schneider BMI0702T02F servo motor, 10-pole, 700 W, 2.48 N.m

MPNBMI0702T02F
Active

Schneider BMI0702T02F — now discontinued, supplied from remaining surplus and broker stock.

$1,735.00Ref. price · indicative, final on quote
Schneider Electric BMI0702T02F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0702T02F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.7 A 230 V, single phase 17.7 A 115 V, single phase
Output current 3s peak10.5 A 230 V 1 s
Continuous stall current2.6 A
Continuous output current2.6 A 8 kHz
Brake pull-in power5 W
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0702T02F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length12.05 in (306 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWith
Nominal speed4000 rpm 230 V single phase 1700 rpm 115 V single phase
Rotor inertia1.24 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase
Shaft diameter0.4 in (11 mm)
Torque constant0.63 N.m/A 68 °F (20 °C)
Back emf constant42.1 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase
Stator inductance7.8 mH 68 °F (20 °C)
Stator resistance2.7 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 115...230 V single phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.89 ms 68 °F (20 °C)

Product details

Overview

The BMI0702T02F is a Schneider servo motor from the BMI series, rated 700 W at 230 V single phase and 400 W at 115 V single phase, delivering 2.48 N.m continuous torque with a top speed of 8000 rpm. It carries 10 poles, an absolute multiturn SinCos Hiperface encoder resolving 131072 points per turn over 4096 turns, and an integrated holding brake — suited for vertical-axis or position-hold applications within the Lexium 32i drive family.

The BMI0702T02F's 10-pole construction sets it apart from the 5-pole BMH1401P17F2A, which delivers 1450 W at 230 V single phase and 29.8 A continuous current — the BMI0702T02F is the lower-power, higher-pole-count option for applications needing finer torque ripple or lower-speed smoothness.

MPN
BMI0702T02F