The BMI0702T07F: Integrated EMC filter saves panel space and eliminates an external filter on single-phase supply lines. The 70 mm flange (2.8 in) and 11 mm shaft fit standard mounting patterns. Natural convection cooling – no forced air required for typical cycle times at these power levels. Sourcing reality: active, in-production part. No last-time-buy window or phase-out date. Quoted to order – send the RFQ and we'll pin down availability for the lot you need.
Bosch Rexroth BMI0702T07F Servo Motor, Single-Phase 700W
MPNBMI0702T07F
Active
Bosch Rexroth BMI0702T07F, single-phase servo motor, 700 W nominal at 230 V, 4000 rpm, with integrated EMC filter and holding brake, Hiperface absolute multiturn feedback.
$1,600.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →Specifications
| Parameter | Value |
|---|---|
| Feedback type | Absolute multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor with power stage |
| Supply voltage limits | 100...240 V |
| Supply voltage | 115...230 V - 15...10 % |
| Maximum current irms | 17.7 A 230 V, single phase 17.7 A 115 V, single phase |
| Output current 3s peak | 10.5 A 230 V 1 s |
| Continuous stall current | 2.6 A |
| Continuous output current | 2.6 A 8 kHz |
| Brake pull-in power | 5 W |
| Nominal output power | 700 W 230 V single phase 400 W 115 V single phase |
| Supply frequency | 50/60 Hz - 5...5 % |
All specifications
| Parameter | Value |
|---|---|
| Network frequency limits | 47.5...63 Hz |
| Number of motor poles | 10 |
| Phases | Single phase |
| IP degree of protection | Shaft IP54 Housing IP65 |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.2 in (5.5 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 3.0...3.2 in (75...82 mm) |
| Electrical connection | Printed circuit board connector |
| EMC filter | Integrated |
| Centring collar depth | 0.10 in (2.5 mm) |
| Length | 12.05 in (306 mm) |
| Category | US1PC5618287 |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft length | 0.9 in (23 mm) |
| Holding brake | With |
| Nominal speed | 4000 rpm 230 V single phase 1700 rpm 115 V single phase |
| Rotor inertia | 1.24 kg.cm² |
| Holding torque | 26.6 lbf.in (3 N.m) holding brake |
| Nominal torque | 19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase |
| Shaft diameter | 0.4 in (11 mm) |
| Torque constant | 0.63 N.m/A 68 °F (20 °C) |
| Back emf constant | 42.1 V/krpm 68 °F (20 °C) |
| Device short name | BMI |
| Motor flange size | 2.8 in (70 mm) |
| Peak stall torque | 58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase |
| Stator inductance | 7.8 mH 68 °F (20 °C) |
| Stator resistance | 2.7 Ohm 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 2 |
| Continuous stall torque | 21.95 lbf.in (2.48 N.m) 115...230 V single phase |
| Maximum radial force fr | 710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm |
| Centring collar diameter | 2.4 in (60 mm) |
| Maximum mechanical speed | 8000 rpm |
| Speed feedback resolution | 32768 points/turn x 4096 turns |
| Distance shaft shoulder-flange | 0.10 in (2.5 mm) |
| Stator electrical time constant | 2.89 ms 68 °F (20 °C) |
Product details
MPN
BMI0702T07F