Skip to main content
Log in
Schneider Electric BMI0702T11A

BMI0702T11A Single-Phase Servo Motor, 2.2 Nm, Hiperface Enco

MPNBMI0702T11A
Obsolete

BMI series servo motor, single phase, 4000 rpm (230 V) / 1700 rpm (115 V), 2.2 Nm @115 V / 1.7 Nm @230 V, integrated EMC filter, absolute single-turn Hiperface encoder, keyed shaft, 10.6 in length.

Schneider Electric BMI0702T11A datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0702T11A key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.7 A 230 V, single phase 17.7 A 115 V, single phase
Output current 3s peak10.5 A 230 V 1 s
Continuous stall current2.6 A
Continuous output current2.6 A 8 kHz
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0702T11A additional specifications
ParameterValue
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (4 mm)
Centring collar depth0.10 in (2.5 mm)
Length10.6 in (268 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWithout
Nominal speed4000 rpm 230 V single phase 1700 rpm 115 V single phase
Rotor inertia1.13 kg.cm²
Nominal torque19.5 lbf.in (2.2 N.m) 115 V single phase 15.05 lbf.in (1.7 N.m) 230 V single phase
Shaft diameter0.4 in (11 mm)
Torque constant0.63 N.m/A 68 °F (20 °C)
Back emf constant42.1 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque58.4 lbf.in (6.6 N.m) 115 V single phase 58.4 lbf.in (6.6 N.m) 230 V single phase
Stator inductance7.8 mH 68 °F (20 °C)
Stator resistance2.7 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 115...230 V single phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.89 ms 68 °F (20 °C)

Product details

What this motor is and what drives the fit

The BMI0702T11A is a single-phase AC servo motor from the BMI series, rated for use on 100–240 V supply lines. Its keyed shaft and international flange (70 mm bolt circle, 60 mm pilot) mount it directly into standard servo reducer or machine frames. The dual-voltage winding delivers 4000 rpm nominal at 230 V and 1700 rpm at 115 V, with peak stall torque of 6.6 Nm at both voltages. Note the nominal torque data: 2.2 Nm at 115 V and 1.7 Nm at 230 V – an unusual inversion that should be double-checked against the application's speed/torque profile before committing the BOM line.

Frequently asked questions

What is BMI0702T11A's listed phase?

The motor is specified as single phase, suitable for 100–240 VAC 50/60 Hz supply.

What is BMI0702T11A's listed length?

Overall length is 10.6 inches (268 mm). Shaft length is 0.9 inches (23 mm), with a shaft diameter of 0.4 inches (11 mm) and a key width of 0.2 inches (4 mm).

MPN
BMI0702T11A