Skip to main content
Log in
Schneider Electric BMI0703P02A

Schneider BMI0703P02A Lexium 32i Servo Motor, 900 W, 3.4 Nm, IP54

MPNBMI0703P02A
Active

Schneider Lexium 32i BMI0703P02A servo motor, 10-pole, three-phase, 900 W, 3.4 Nm, 480 V, IP54, multiturn absolute SinCos Hiperface feedback, 131072 p/t x 4096 turns, untapped shaft, international standard flange.

Schneider Electric BMI0703P02A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0703P02A key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Nominal output power900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0703P02A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length11.8 in (300 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase
Rotor inertia1.67 kg.cm²
Nominal torque25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase
Shaft diameter0.6 in (14 mm)
Torque constant1.41 N.m/A 68 °F (20 °C)
Back emf constant95.39 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase
Stator inductance25.6 mH 68 °F (20 °C)
Stator resistance7.99 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 208...480 V three phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant3.2 ms 68 °F (20 °C)

Product details

Overview

The BMI0703P02A is a Schneider Lexium 32i servo motor, order code BMI0703P02A, with 10 poles, three-phase winding, 900 W rated power, and 3.4 Nm torque at 480 V three-phase supply. Rated IP54, the motor carries an integrated EMC filter and uses natural convection cooling. Feedback is absolute multiturn SinCos Hiperface, 131072 points per turn x 4096 turns, compatible with LXM32i CANopen and EtherCAT drive control units.

Versus the BMI0703P01A, the BMI0703P02A adds multiturn absolute feedback (131072 p/t x 4096 turns vs 131072 p/t single-turn) — choose the P02A when the application must retain absolute position across multiple shaft revolutions after power loss.

Integration

IP54 rating matches the enclosure of the Lexium 32i drive family; the motor is intended for cabinet or machine-frame installation where dust and splash ingress are limited.

Lifecycle

MPN
BMI0703P02A