Skip to main content
Log in
Schneider Electric BMI0703P27A

Schneider BMI0703P27A Servo Motor, 900 W, 480 V, IP65

MPNBMI0703P27A
Obsolete

Schneider BMI0703P27A — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,830.00Ref. price · indicative, final on quote
Schneider Electric BMI0703P27A datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0703P27A key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Nominal output power900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0703P27A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length11.8 in (300 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase
Rotor inertia1.67 kg.cm²
Nominal torque25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase
Shaft diameter0.6 in (14 mm)
Torque constant1.41 N.m/A 68 °F (20 °C)
Back emf constant95.39 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase
Stator inductance25.6 mH 68 °F (20 °C)
Stator resistance7.99 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 208...480 V three phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant3.2 ms 68 °F (20 °C)

Product details

Overview

The BMI0703P27A is a Schneider BMI-series servo motor with integrated power stage, order code BMI0703P27A, rated for 900 W output power at 480 V three-phase, 60 Hz, with 10 poles. The motor delivers 3.4 Nm rated torque and 2 A continuous current, with an IP65 enclosure for washdown environments and natural convection cooling.

The 900 W power output and 3.4 Nm torque suit the BMI0703P27A for direct-drive or geared motion axes in packaging, material handling, and general automation, with the 10-pole design providing smooth low-speed torque ripple. The absolute multiturn SinCos Hiperface feedback (32768 points/turn x 4096 turns) eliminates the need for a homing sequence on power-up, reducing commissioning time on multi-axis machines. Rated for 480 V three-phase supply and 2 A continuous current, the motor integrates with Lexium 32i drive control units via the printed circuit board connector, supporting CANopen or EtherCAT fieldbuses.

MPN
BMI0703P27A