Skip to main content
Log in
Schneider Electric BMI0703P32A

BMI0703P32A Servo Motor, 3-Phase, 3300 rpm, IP65

MPNBMI0703P32A
Active

Manufacturer series BMI, 3-phase servo motor with absolute multiturn feedback, integrated EMC filter, IP65, 3300 rpm nominal speed.

Schneider Electric BMI0703P32A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0703P32A key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms12.5 A 400 V, three phase 12.5 A 480 V, three phase 12.5 A 208 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Nominal output power900 W 400 V three phase 900 W 480 V three phase 450 W 208 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0703P32A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (5 mm)
Centring collar depth0.10 in (2.5 mm)
Length11.8 in (300 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed3300 rpm 400 V three phase 1600 rpm 208 V three phase 3900 rpm 480 V three phase
Rotor inertia1.67 kg.cm²
Nominal torque25.7 lbf.in (2.9 N.m) 208 V three phase 23.9 lbf.in (2.7 N.m) 400 V three phase 20.4 lbf.in (2.3 N.m) 480 V three phase
Shaft diameter0.6 in (14 mm)
Torque constant1.41 N.m/A 68 °F (20 °C)
Back emf constant95.39 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 208 V three phase 76.1 lbf.in (8.6 N.m) 400 V three phase 76.1 lbf.in (8.6 N.m) 480 V three phase
Stator inductance25.6 mH 68 °F (20 °C)
Stator resistance7.99 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 208...480 V three phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant3.2 ms 68 °F (20 °C)

Product details

What you’re looking at

The BMI0703P32A is a 3-phase servo motor with an integrated EMC filter and absolute multiturn SinCos Hiperface feedback, rated for 3300 rpm at 400 V three-phase. Nominal torque sits at 2.9 N·m on 400 V, with peak stall torque of 8.6 N·m across the voltage range. Feedback is an absolute multiturn SinCos Hiperface encoder—no need for a homing routine after power loss, which saves commissioning time on pick-and-place or rotary indexing stations.

Mounting and fit

International standard flange with a 70 mm mounting face and 60 mm centring collar. Four M5 bolts on a bolt circle—standard pattern for frame sizes in this torque class. Shaft is 14 mm diameter, keyed, with a 30 mm length. The key is a standard 5 mm width, so off-the-shelf pulleys and couplings fit without modification. Electrical connection via a printed circuit board connector—mates directly to the drive cable without a junction box. IP65 rating holds on the motor side; keep the connector shielded for washdown zones.

Frequently asked questions

What is BMI0703P32A's listed phase?

Three phase.

What is the length of BMI0703P32A?

11.8 in (300 mm).

MPN
BMI0703P32A