Skip to main content
Log in
Schneider Electric BMI1002P11A

Schneider BMI1002P11A Servo Motor, 1000 W, 6 N.m, 6000 rpm, IP54

MPNBMI1002P11A
Obsolete

Schneider Square D BMI1002P11A servo motor, 10-pole, three-phase, 1000 W, 6 N.m (53.1 lbf.in) at 208-480 V, 6000 rpm, IP54, keyed shaft, absolute single-turn SinCos Hiperface feedback, natural convection cooling, international standard flange.

$3,180.00 – $3,456.00Ref. price · indicative, final on quote
Schneider Electric BMI1002P11A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1002P11A key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms17.5 A 208 V, three phase 17.5 A 400 V, three phase 17.5 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Nominal output power1000 W 208 V three phase 1900 W 400 V three phase 1900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI1002P11A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length10.7 in (273 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed1900 rpm 208 V three phase 3800 rpm 400 V three phase 4700 rpm 480 V three phase
Rotor inertia6.28 kg.cm²
Nominal torque45.1 lbf.in (5.1 N.m) 400 V three phase 47.8 lbf.in (5.4 N.m) 208 V three phase 36.3 lbf.in (4.1 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.28 N.m/A 68 °F (20 °C)
Back emf constant84.52 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque123.9 lbf.in (14 N.m) 208 V three phase 123.9 lbf.in (14 N.m) 400 V three phase 123.9 lbf.in (14 N.m) 480 V three phase
Stator inductance9.79 mH 68 °F (20 °C)
Stator resistance2.347 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 208...480 V three phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.17 ms 68 °F (20 °C)

Product details

Overview

The BMI1002P11A is a Schneider Square D BMI-series servo motor, 10-pole, three-phase, rated 1000 W output with 6 N.m (53.1 lbf.in) torque across the 208-480 V range at 60 Hz, and a maximum speed of 6000 rpm. The motor carries an IP54 enclosure, uses natural convection cooling, and mounts via an international standard flange with a keyed shaft.

Selection notes

The 1000 W power output and 6 N.m torque are specified at 60 Hz and hold across the full 208-480 V three-phase supply range — no derating required within that voltage band. Feedback is absolute single-turn SinCos Hiperface, resolution 131072 points per turn. An integrated EMC filter is included; no additional external filter is required for standard installations.

Lifecycle

MPN
BMI1002P11A