Skip to main content
Log in
Schneider Electric BMI1002P27F

Schneider BMI1002P27F servo motor, 10-pole, 1000 W, IP65, 480 V

MPNBMI1002P27F
Obsolete

Schneider BMI1002P27F Square D — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$2,380.00 – $4,659.00Ref. price · indicative, final on quote
Schneider Electric BMI1002P27F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1002P27F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms17.5 A 208 V, three phase 17.5 A 400 V, three phase 17.5 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Brake pull-in power8 W
Nominal output power1000 W 208 V three phase 1900 W 400 V three phase 1900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1002P27F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.1 in (3.5 mm)
Length11.1 in (282 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1900 rpm 208 V three phase 3800 rpm 400 V three phase 4700 rpm 480 V three phase
Rotor inertia6.77 kg.cm²
Holding torque48.7 lbf.in (5.5 N.m) holding brake
Nominal torque45.1 lbf.in (5.1 N.m) 400 V three phase 47.8 lbf.in (5.4 N.m) 208 V three phase 36.3 lbf.in (4.1 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.28 N.m/A 68 °F (20 °C)
Back emf constant84.52 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque123.9 lbf.in (14 N.m) 208 V three phase 123.9 lbf.in (14 N.m) 400 V three phase 123.9 lbf.in (14 N.m) 480 V three phase
Stator inductance9.79 mH 68 °F (20 °C)
Stator resistance2.347 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 208...480 V three phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.17 ms 68 °F (20 °C)

Product details

Overview

The Schneider BMI1002P27F is a 10-pole three-phase servo motor rated for 1000 W output at 480 V, with a continuous current rating of 4 A. The unit carries an IP65 enclosure, integrated EMC filter, and a holding brake. Feedback is provided by an absolute multiturn SinCos Hiperface encoder with 32768 points/turn x 4096 turns resolution. Natural convection cooling eliminates the need for forced air. The motor is compatible with the Lexium 32i drive series and mounts via an international standard flange.

Lifecycle

MPN
BMI1002P27F