Skip to main content
Log in
Schneider Electric BMI1002P36F

Schneider BMI1002P36F motor, 10-pole, 1000 W, 480 V three-phase

MPNBMI1002P36F
Obsolete

Schneider BMI series motor, order code BMI1002P36F, 10-pole, three-phase, 1000 W output, 480 V supply, 53.1 lbf.in torque, IP65, integrated holding brake, natural convection cooling, absolute single-turn SinCos Hiperface feedback.

Schneider Electric BMI1002P36F datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI1002P36F key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms17.5 A 208 V, three phase 17.5 A 400 V, three phase 17.5 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Brake pull-in power8 W
Nominal output power1000 W 208 V three phase 1900 W 400 V three phase 1900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1002P36F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length11.1 in (282 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1900 rpm 208 V three phase 3800 rpm 400 V three phase 4700 rpm 480 V three phase
Rotor inertia6.77 kg.cm²
Holding torque48.7 lbf.in (5.5 N.m) holding brake
Nominal torque45.1 lbf.in (5.1 N.m) 400 V three phase 47.8 lbf.in (5.4 N.m) 208 V three phase 36.3 lbf.in (4.1 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.28 N.m/A 68 °F (20 °C)
Back emf constant84.52 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque123.9 lbf.in (14 N.m) 208 V three phase 123.9 lbf.in (14 N.m) 400 V three phase 123.9 lbf.in (14 N.m) 480 V three phase
Stator inductance9.79 mH 68 °F (20 °C)
Stator resistance2.347 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 208...480 V three phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution32768 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.17 ms 68 °F (20 °C)

Product details

Overview

The BMI1002P36F is a Schneider BMI series motor with 10 poles, three-phase winding, rated for 1000 W output at 480 V supply. It delivers 53.1 lbf.in (6 N·m) torque and carries an IP65 rating for dust- and water-jet protection.

The integrated holding brake holds the load at standstill, eliminating the need for an external brake resistor on vertical axes. Absolute single-turn SinCos Hiperface feedback provides 32768 points per turn for precise position control without a homing cycle. Natural convection cooling keeps the motor free of fan noise and maintenance, suited for continuous-duty applications.

MPN
BMI1002P36F