Skip to main content
Log in
Schneider Electric BMI1002T16A

Schneider Electric BMI1002T16A Servo Motor, Single-Phase, Hi

MPNBMI1002T16A
Obsolete

Schneider Electric BMI1002T16A BMI series single-phase servo motor, 10-pole, 2-stack, 100 mm flange, absolute single-turn SinCos Hiperface feedback, IP65 housing.

$2,865.00 – $3,124.00Ref. price · indicative, final on quote
Schneider Electric BMI1002T16A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1002T16A key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms30 A 115 V, single phase 30 A 230 V, single phase
Output current 3s peak18 A 230 V 3 s
Continuous stall current6 A
Continuous output current6 A 8 kHz
Nominal output power750 W 115 V single phase 1300 W 230 V single phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI1002T16A additional specifications
ParameterValue
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length10.7 in (273 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed1400 rpm 115 V single phase 3000 rpm 230 V single phase
Rotor inertia6.28 kg.cm²
Nominal torque47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase
Shaft diameter0.7 in (19 mm)
Torque constant0.89 N.m/A 68 °F (20 °C)
Back emf constant58.5 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase
Stator inductance4.7 mH 68 °F (20 °C)
Stator resistance1.08 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 115...230 V single phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution32768 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.35 ms 68 °F (20 °C)

Product details

Motor specifications and sourcing

The Schneider BMI1002T16A is a single-phase servo motor from the BMI series, built for 100-240 VAC supply and delivering 750 W nominal at 115 V or 1300 W at 230 V. It carries an absolute single-turn SinCos Hiperface feedback and an integrated EMC filter, so it mates with drives expecting Hiperface and avoids an external filter in the cabinet. The motor uses a 100 mm international standard flange with a keyed shaft 19 mm diameter by 40 mm long. The housing is IP65, shaft IP54, which suits washdown environments if the shaft seal is protected.

Frequently asked questions

What feedback type does the BMI1002T16A use?

It uses an absolute single-turn SinCos Hiperface feedback.

What is the IP rating of the BMI1002T16A?

The housing is IP65; the shaft seal is rated IP54.

What supply voltage does the BMI1002T16A accept?

It accepts 100-240 VAC single phase, 50/60 Hz.

MPN
BMI1002T16A