Skip to main content
Log in
Schneider Electric BMI1002T17A

Schneider BMI1002T17A Unclassified 10-pole 230V 750W IP54

MPNBMI1002T17A
Obsolete

Schneider BMI1002T17A — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

Schneider Electric BMI1002T17A datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI1002T17A key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms30 A 115 V, single phase 30 A 230 V, single phase
Output current 3s peak18 A 230 V 3 s
Continuous stall current6 A
Continuous output current6 A 8 kHz
Nominal output power750 W 115 V single phase 1300 W 230 V single phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI1002T17A additional specifications
ParameterValue
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length10.7 in (273 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed1400 rpm 115 V single phase 3000 rpm 230 V single phase
Rotor inertia6.28 kg.cm²
Nominal torque47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase
Shaft diameter0.7 in (19 mm)
Torque constant0.89 N.m/A 68 °F (20 °C)
Back emf constant58.5 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase
Stator inductance4.7 mH 68 °F (20 °C)
Stator resistance1.08 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 115...230 V single phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.35 ms 68 °F (20 °C)

Product details

Overview

The BMI1002T17A is a Schneider Unclassified device with 10 poles, single-phase operation, 230 V supply, 750 W power output, and 6 A current rating, enclosed in an IP54-rated housing. Cooling is by natural convection, and an integrated EMC filter is included.

The 10-pole configuration and single-phase 230 V supply suit this device for applications requiring moderate power switching at 750 W and 6 A. Natural convection cooling eliminates the need for forced air, and the integrated EMC filter reduces conducted emissions on the line side.

MPN
BMI1002T17A