Skip to main content
Log in
Schneider Electric BMI1002T21F

Schneider BMI1002T21F servo motor, 750 W, 230 V single-phase, IP65

MPNBMI1002T21F
Active

Schneider BMI1002T21F — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

Schneider Electric BMI1002T21F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1002T21F key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms30 A 115 V, single phase 30 A 230 V, single phase
Output current 3s peak18 A 230 V 3 s
Continuous stall current6 A
Continuous output current6 A 8 kHz
Brake pull-in power8 W
Nominal output power750 W 115 V single phase 1300 W 230 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1002T21F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.1 in (3.5 mm)
Length11.1 in (282 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1400 rpm 115 V single phase 3000 rpm 230 V single phase
Rotor inertia6.77 kg.cm²
Holding torque48.7 lbf.in (5.5 N.m) holding brake
Nominal torque47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase
Shaft diameter0.7 in (19 mm)
Torque constant0.89 N.m/A 68 °F (20 °C)
Back emf constant58.5 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase
Stator inductance4.7 mH 68 °F (20 °C)
Stator resistance1.08 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 115...230 V single phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.35 ms 68 °F (20 °C)

Product details

Overview

The BMI1002T21F is a Schneider servo motor with 750 W rated power, 230 V single-phase supply, and 6 A current rating, protected to IP65. It includes a holding brake and absolute single-turn SinCos Hiperface feedback, with natural convection cooling and an international standard flange.

The motor is compatible with Lexium 32i drives, using absolute single-turn SinCos Hiperface feedback for position control. Rated torque is 53.1 lbf.in (6 N·m) at 115–230 V single-phase, with a rotor inertia of 6.77 kg·cm².

MPN
BMI1002T21F