Skip to main content
Log in
Schneider Electric BMI1002T26F

Schneider BMI1002T26F BMI motor, 750 W, 6 A, 230 V, IP65

MPNBMI1002T26F
Active

Schneider BMI1002T26F — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

Schneider Electric BMI1002T26F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1002T26F key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms30 A 115 V, single phase 30 A 230 V, single phase
Output current 3s peak18 A 230 V 3 s
Continuous stall current6 A
Continuous output current6 A 8 kHz
Brake pull-in power8 W
Nominal output power750 W 115 V single phase 1300 W 230 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1002T26F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.1 in (3.5 mm)
Length11.1 in (282 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1400 rpm 115 V single phase 3000 rpm 230 V single phase
Rotor inertia6.77 kg.cm²
Holding torque48.7 lbf.in (5.5 N.m) holding brake
Nominal torque47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase
Shaft diameter0.7 in (19 mm)
Torque constant0.89 N.m/A 68 °F (20 °C)
Back emf constant58.5 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase
Stator inductance4.7 mH 68 °F (20 °C)
Stator resistance1.08 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 115...230 V single phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution32768 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.35 ms 68 °F (20 °C)

Product details

Overview

The BMI1002T26F is a Schneider BMI series servo motor, order code BMI1002T26F, rated at 750 W output power with 6 A current draw on a 230 V single-phase supply. The motor carries an IP65 enclosure rating and includes an integrated holding brake and absolute single-turn SinCos Hiperface feedback.

Applications

The BMI series is designed for use with Lexium 32i servo drives, suiting it for positioning and motion-control tasks in packaging, material handling, and general machine automation.

The 750 W rated power and 6 A current rating define the continuous torque capability; the holding brake holds the load at standstill without power to the motor windings. The absolute single-turn Hiperface feedback provides position data at power-up, eliminating the need for a homing cycle on each startup. Natural convection cooling and an integrated EMC filter simplify panel layout by removing the need for forced ventilation or external filter modules.

MPN
BMI1002T26F