Skip to main content
Log in
Schneider Electric BMI1002T27F

Schneider BMI1002T27F BMI servo motor, 750 W, 6 Nm, 230 V

MPNBMI1002T27F
Active

Schneider BMI1002T27F — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

Schneider Electric BMI1002T27F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1002T27F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms30 A 115 V, single phase 30 A 230 V, single phase
Output current 3s peak18 A 230 V 3 s
Continuous stall current6 A
Continuous output current6 A 8 kHz
Brake pull-in power8 W
Nominal output power750 W 115 V single phase 1300 W 230 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1002T27F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.1 in (3.5 mm)
Length11.1 in (282 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1400 rpm 115 V single phase 3000 rpm 230 V single phase
Rotor inertia6.77 kg.cm²
Holding torque48.7 lbf.in (5.5 N.m) holding brake
Nominal torque47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase
Shaft diameter0.7 in (19 mm)
Torque constant0.89 N.m/A 68 °F (20 °C)
Back emf constant58.5 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase
Stator inductance4.7 mH 68 °F (20 °C)
Stator resistance1.08 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque53.1 lbf.in (6 N.m) 115...230 V single phase
Maximum radial force fr990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.35 ms 68 °F (20 °C)

Product details

Overview

The BMI1002T27F is a Schneider BMI-series servo motor, order code BMI1002T27F, rated at 750 W output power and 6 Nm torque on a 230 V single-phase supply. The motor is IP65-rated, mounts via an international standard flange, and includes an integrated holding brake and absolute multiturn SinCos Hiperface feedback.

Applications

As a BMI servo motor, the BMI1002T27F is used in motion-control axes on packaging machines, material-handling systems, and general automation equipment requiring precise speed and position control.

The 750 W rated power and 6 Nm torque suit the motor for medium-load axes, while the 6000 rpm rated speed supports dynamic positioning cycles. The absolute multiturn SinCos Hiperface feedback provides 32768 points per turn and 4096 turns of position tracking, eliminating the need for a homing routine after power loss. The integrated holding brake holds the load at standstill without power to the motor windings, and the natural convection cooling eliminates the need for forced air.

MPN
BMI1002T27F