The BMI1002T37A is a 100 mm flange servo motor designed for single-phase supply lines. It gives you 750 W at 115 V or 1300 W at 230 V, with a continuous stall torque of 6 N·m and peak torque of 14.5 N·m. The motor is wound for 10 poles, so it runs smooth at low speeds. No holding brake here — if your application needs to hold a vertical load without power, you'll need an external brake or a different motor.
Feedback and drive compatibility
Feedback is an absolute multiturn SinCos Hiperface encoder. That means the motor knows its position as soon as power comes on — no homing cycle needed. The Hiperface protocol is common on drives from Schneider (Lexium) and others; just make sure your drive accepts absolute encoder input. The connector is a printed circuit board header, so you'll want the mating Harness ready when you wire it in.
Field-fit and physical details
Shaft is keyed, 19 mm diameter, 40 mm long. Mounting uses an international standard flange with centring collar 95 mm diameter and 3.5 mm deep. Four 9 mm holes on a 100 mm bolt circle. IP65 enclosure means it can take a washdown — fine for food or wet environment as long as the connector is mated properly. Natural convection cooling, so no fan to fail, but leave air space around the finned body.