Skip to main content
Log in
Schneider Electric BMI1003P01A

Schneider BMI1003P01A Servo Motor, 10-Pole, 1000 W, IP54, Single-Turn Absolute

MPNBMI1003P01A
Active

Schneider BMI series servo motor, order code BMI1003P01A, 10-pole, three-phase, 1000 W, 8.5 N.m, 6000 rpm, 480 V, IP54, natural convection, absolute single-turn SinCos Hiperface feedback, 131072 points/turn, international standard flange, printed circuit board connector.

$3,585.00 – $3,702.00Ref. price · indicative, final on quote
Schneider Electric BMI1003P01A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1003P01A key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Nominal output power1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI1003P01A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.1 in (3.5 mm)
Length11.8 in (299 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase
Rotor inertia9.37 kg.cm²
Nominal torque63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.7 N.m/A 68 °F (20 °C)
Back emf constant112 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase
Stator inductance11.43 mH 68 °F (20 °C)
Stator resistance2.31 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque75.2 lbf.in (8.5 N.m) 208...480 V three phase
Maximum radial force fr1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.95 ms 68 °F (20 °C)

Product details

Overview

The BMI1003P01A is a Schneider BMI-series servo motor with a 10-pole, three-phase design rated at 1000 W output, 8.5 N.m torque, and 6000 rpm at 480 V, 60 Hz. The motor is IP54-rated, cooled by natural convection, and carries an absolute single-turn SinCos Hiperface feedback encoder with 131072 points/turn resolution.

Compared to the BMH1003P32A2A, the BMI1003P01A delivers 1000 W vs 2700 W, 4 A vs 26.71 A continuous current, and 4.0 A vs 7.69 A switching current — choose the BMI1003P01A for lower-power applications where the higher continuous current of the BMH1003P32A2A is not required. Versus the BMH0702P01A1A, the BMI1003P01A shares the same IP54 and natural convection cooling but offers 1000 W vs 700 W and absolute single-turn feedback versus single-turn — the BMI1003P01A provides higher power and absolute position retention on power loss.

Lifecycle

MPN
BMI1003P01A