Skip to main content
Log in
Schneider Electric BMI1003P02A

Schneider BMI1003P02A motor, 10 poles, 1000 W, 4 A, IP54

MPNBMI1003P02A
Obsolete

Schneider BMI series motor, order code BMI1003P02A, 10 poles, three-phase, 1000 W power output, 4 A current, 75.2 lbf.in torque, IP54, natural convection cooling, integrated EMC filter, 480 V AC supply.

Schneider Electric BMI1003P02A datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1003P02A key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Nominal output power1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI1003P02A additional specifications
ParameterValue
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.1 in (3.5 mm)
Length11.8 in (299 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase
Rotor inertia9.37 kg.cm²
Nominal torque63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.7 N.m/A 68 °F (20 °C)
Back emf constant112 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase
Stator inductance11.43 mH 68 °F (20 °C)
Stator resistance2.31 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque75.2 lbf.in (8.5 N.m) 208...480 V three phase
Maximum radial force fr1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.95 ms 68 °F (20 °C)

Product details

Overview

The BMI1003P02A is a Schneider BMI-series motor with 10 poles and three-phase operation, rated for 1000 W power output and 4 A continuous current. It delivers 75.2 lbf.in (8.5 N·m) torque on a 480 V three-phase supply and carries an IP54 enclosure rating for dust and splash protection.

The 10-pole design provides a lower synchronous speed (6000 rpm rated) suited for applications requiring higher torque at lower speeds without a gearbox. Natural convection cooling eliminates the need for a fan, reducing maintenance and noise in clean environments, while the integrated EMC filter simplifies compliance with emission limits. The absolute multiturn SinCos Hiperface feedback (131072 points/turn x 4096 turns) enables precise position control over multiple shaft revolutions without a home cycle.

MPN
BMI1003P02A