Skip to main content
Log in
Schneider Electric BMI1003P11F

Schneider BMI1003P11F motor, 10 poles, 1000 W, IP54, 480 V

MPNBMI1003P11F
Obsolete

Schneider BMI1003P11F — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

Schneider Electric BMI1003P11F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1003P11F key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Brake pull-in power8 W
Nominal output power1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1003P11F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length13.3 in (338 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase
Rotor inertia10.3 kg.cm²
Holding torque79.7 lbf.in (9 N.m) holding brake
Nominal torque63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.7 N.m/A 68 °F (20 °C)
Back emf constant112 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase
Stator inductance11.43 mH 68 °F (20 °C)
Stator resistance2.31 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque75.2 lbf.in (8.5 N.m) 208...480 V three phase
Maximum radial force fr1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.95 ms 68 °F (20 °C)

Product details

Overview

The BMI1003P11F is a Schneider BMI series motor with 10 poles, three-phase, rated for 1000 W output at 4 A, IP54, 480 V supply, natural convection cooling, and international standard flange mounting. It includes an integrated EMC filter and a holding brake, with absolute single-turn SinCos Hiperface feedback for position control.

The BMI1003P11F is compatible with Lexium 32i drives, using an absolute single-turn SinCos Hiperface feedback encoder providing 131072 points per turn for precise position feedback. The integrated holding brake holds the load at standstill without power, and the integrated EMC filter reduces conducted emissions, simplifying panel wiring.

MPN
BMI1003P11F