Skip to main content
Log in
Schneider Electric BMI1003P12F

BMI1003P12F Servo Motor, 1/2 kW, 1500-3700 rpm, Holding Brak

MPNBMI1003P12F
Active

BMI BMI1003P12F, three-phase servo motor, 1000-2100 W, 1500-3700 rpm, with holding brake, absolute multiturn Hiperface encoder, integrated EMC filter, IP65, flange 100 mm, keyed shaft 19 mm, 338 mm length.

$2,805.00 – $4,606.00Ref. price · indicative, final on quote
Schneider Electric BMI1003P12F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI1003P12F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase
Output current 3s peak12 A 400 V 3 s
Continuous stall current4 A
Continuous output current4 A 8 kHz
Brake pull-in power8 W
Nominal output power1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI1003P12F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length13.3 in (338 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.6 in (40 mm)
Holding brakeWith
Nominal speed1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase
Rotor inertia10.3 kg.cm²
Holding torque79.7 lbf.in (9 N.m) holding brake
Nominal torque63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.7 N.m/A 68 °F (20 °C)
Back emf constant112 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size3.9 in (100 mm)
Peak stall torque169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase
Stator inductance11.43 mH 68 °F (20 °C)
Stator resistance2.31 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque75.2 lbf.in (8.5 N.m) 208...480 V three phase
Maximum radial force fr1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.1 in (3.5 mm)
Stator electrical time constant4.95 ms 68 °F (20 °C)

Product details

The BMI1003P12F: The absolute multiturn SinCos Hiperface feedback keeps position on power loss—no homing cycle needed on restart. Integrated EMC filter saves an external box on the line side. Natural convection cooling means no fan to fail, but watch continuous stall torque (8.5 N·m) in a tight cabinet; derate if the ambient climbs much above 40 °C. Rated for 208–480 V three-phase, 50/60 Hz ±5 %. Stator inductance 11.43 mH, resistance 2.31 Ω at 20 °C. Peak stall torque 19.2 N·m across the voltage range—enough for short overloads. The 10-pole design gives smooth low-speed torque for direct-drive or low-ratio applications.

Lifecycle stage is marked current—this is an active-production part. No obsolescence notice.

Frequently asked questions

What phase is the BMI1003P12F?

Three phase.

What is the length of the BMI1003P12F?

13.3 in (338 mm).

What is the holding brake torque?

9 N·m (79.7 lbf·in).

What feedback type does the BMI1003P12F use?

Absolute multiturn SinCos Hiperface.

MPN
BMI1003P12F