Schneider BMI series servo motor, order code BMI1003P26F, 10-pole, three-phase, 8.5 Nm rated torque, 4 A rated current, IP65, with holding brake, absolute single-turn SinCos Hiperface feedback, 32768 points/turn, natural convection cooling, international standard flange, compatible with Lexium 32i.
| Parameter | Value |
|---|---|
| Feedback type | Absolute single turn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor with power stage |
| Supply voltage limits | 208...480 V |
| Supply voltage | 208...480 V - 15...10 % |
| Maximum current irms | 26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase |
| Output current 3s peak | 12 A 400 V 3 s |
| Continuous stall current | 4 A |
| Continuous output current | 4 A 8 kHz |
| Brake pull-in power | 8 W |
| Nominal output power | 1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase |
| Supply frequency | 50/60 Hz - 5...5 % |
| Parameter | Value |
|---|---|
| Network frequency limits | 47.5...63 Hz |
| Number of motor poles | 10 |
| Phases | Three phase |
| IP degree of protection | IP65 |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.4 in (9 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 4.5 in (115 mm) |
| Electrical connection | Printed circuit board connector |
| EMC filter | Integrated |
| Centring collar depth | 0.1 in (3.5 mm) |
| Length | 13.3 in (338 mm) |
| Category | US1PC5618287 |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft length | 1.6 in (40 mm) |
| Holding brake | With |
| Nominal speed | 1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase |
| Rotor inertia | 10.3 kg.cm² |
| Holding torque | 79.7 lbf.in (9 N.m) holding brake |
| Nominal torque | 63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase |
| Shaft diameter | 0.7 in (19 mm) |
| Torque constant | 1.7 N.m/A 68 °F (20 °C) |
| Back emf constant | 112 V/krpm 68 °F (20 °C) |
| Device short name | BMI |
| Motor flange size | 3.9 in (100 mm) |
| Peak stall torque | 169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase |
| Stator inductance | 11.43 mH 68 °F (20 °C) |
| Stator resistance | 2.31 Ohm 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 3 |
| Continuous stall torque | 75.2 lbf.in (8.5 N.m) 208...480 V three phase |
| Maximum radial force fr | 1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm |
| Centring collar diameter | 3.7 in (95 mm) |
| Maximum mechanical speed | 6000 rpm |
| Speed feedback resolution | 32768 points/turn |
| Distance shaft shoulder-flange | 0.1 in (3.5 mm) |
| Stator electrical time constant | 4.95 ms 68 °F (20 °C) |
The BMI1003P26F is a Schneider BMI-series servo motor, 10-pole, three-phase, rated 8.5 Nm torque at 208...480 V three-phase, 4 A current output, IP65 enclosure, with integrated holding brake and natural convection cooling. Feedback is absolute single-turn SinCos Hiperface, 32768 points/turn; the motor mounts on an international standard flange and is compatible with Lexium 32i drives.
No related articles