The BMI1003P32A is a three-phase servo motor from Schneider Electric's BMI series, rated for 2100 W at 480 V with an integrated Hiperface absolute multiturn encoder. It delivers 5.6 N.m continuous at speed up to 3700 rpm on 480 V three-phase, and a peak of 19.2 N.m across all supply voltages.
Nominal torque and speed depend on supply voltage: 7.2 Nm at 1500 rpm on 208 V, 6.8 Nm at 3000 rpm on 400 V, and 5.6 Nm at 3700 rpm on 480 V. The continuous stall torque holds at 8.5 Nm regardless of line input, which is what you plan for a hold or tensioning application. The 100 mm international flange (centring collar diameter 95 mm, bolt circle 9 mm) mates with standard gearbox or bracket. IP65 covers hose-down and dusty environments — no external shroud needed. The integrated EMC filter saves a panel component and wiring step. Feedback is a Hiperface absolute multiturn encoder, giving position on power-up without a home sequence. The connector is a PCB-mount type; the drive cable needs a matching mating connector. No holding brake on this version — plan for an external brake or mechanical hold if needed.