BMI1003P36F is a 10-pole, 3-stack servo motor designed for three-phase supplies from 208 to 480 V. It delivers 7.2 Nm nominal torque at 208 V, 6.8 Nm at 400 V, and 5.6 Nm at 480 V. Speed scales with voltage: 1500, 3000, or 3700 rpm respectively. The integrated holding brake holds 9 Nm, good for vertical axis hold without an external brake resistor. Feedback is an absolute single-turn SinCos Hiperface encoder, providing position at power-up. EMC filter is built in, and the housing is IP65, so this motor mounts directly on the machine without a separate cabinet. Shaft is keyed, 19 mm diameter, with a 100 mm flange – standard for European servo mounts.
BMI1003P36F Servo Motor, Three-Phase, 1500-3700 rpm, 7.2 Nm,
MPNBMI1003P36F
Active
BMI1003P36F, three-phase servo motor, 1500/3000/3700 rpm, 7.2 Nm nominal torque, holding brake 9 Nm, IP65, absolute single-turn SinCos Hiperface feedback.
$2,495.00 – $4,035.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →Specifications
| Parameter | Value |
|---|---|
| Feedback type | Absolute single turn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor with power stage |
| Supply voltage limits | 208...480 V |
| Supply voltage | 208...480 V - 15...10 % |
| Maximum current irms | 26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase |
| Output current 3s peak | 12 A 400 V 3 s |
| Continuous stall current | 4 A |
| Continuous output current | 4 A 8 kHz |
| Brake pull-in power | 8 W |
| Nominal output power | 1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase |
| Supply frequency | 50/60 Hz - 5...5 % |
All specifications
| Parameter | Value |
|---|---|
| Network frequency limits | 47.5...63 Hz |
| Number of motor poles | 10 |
| Phases | Three phase |
| IP degree of protection | IP65 |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.4 in (9 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 4.5 in (115 mm) |
| Electrical connection | Printed circuit board connector |
| EMC filter | Integrated |
| Key width | 0.2 in (6 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Length | 13.3 in (338 mm) |
| Category | US1PC5618287 |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft length | 1.6 in (40 mm) |
| Holding brake | With |
| Nominal speed | 1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase |
| Rotor inertia | 10.3 kg.cm² |
| Holding torque | 79.7 lbf.in (9 N.m) holding brake |
| Nominal torque | 63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase |
| Shaft diameter | 0.7 in (19 mm) |
| Torque constant | 1.7 N.m/A 68 °F (20 °C) |
| Back emf constant | 112 V/krpm 68 °F (20 °C) |
| Device short name | BMI |
| Motor flange size | 3.9 in (100 mm) |
| Peak stall torque | 169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase |
| Stator inductance | 11.43 mH 68 °F (20 °C) |
| Stator resistance | 2.31 Ohm 68 °F (20 °C) |
| Maximum axial force fa | 0.2 x Fr |
| Number of motor stacks | 3 |
| Continuous stall torque | 75.2 lbf.in (8.5 N.m) 208...480 V three phase |
| Maximum radial force fr | 1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm |
| Centring collar diameter | 3.7 in (95 mm) |
| Maximum mechanical speed | 6000 rpm |
| Speed feedback resolution | 32768 points/turn |
| Distance shaft shoulder-flange | 0.1 in (3.5 mm) |
| Stator electrical time constant | 4.95 ms 68 °F (20 °C) |
Product details
Frequently asked questions
What is BMI1003P36F's listed phase?
Three-phase.
What is BMI1003P36F's listed length?
13.3 in (338 mm).
MPN
BMI1003P36F