Skip to main content
Log in
Schneider Electric BMXDDO3202

Schneider BMXDDO3202 Modicon X80 32-Output Module, 0.55A/ch

MPNBMXDDO3202
Active

Schneider BMXDDO3202, Modicon X80 discrete output module, 32 transistor outputs, 12/24 V DC, 0.55 A per channel.

$485.31 – $704.27Ref. price · indicative, final on quote
Schneider Electric BMXDDO3202 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMXDDO3202 key specifications
ParameterValue
Protection typeExternal fuse reverse polarity protection short-circuit protection overload protection overvoltage protection
Range of productModicon X80
Discrete output typeSolid state
Product or component typeDiscrete output module
Maximum voltage drop10 MOhm 500 V DC
Discrete output voltage12...24 V 10.8...30 V DC
Voltage detection threshold< 14 V DC preactuator fault > 18 V DC preactuator at state 0
Current per channel0.55 A
Discrete output current0.5 A
Maximum leakage current0.1 mA at state 0
Maximum current per module17.6 A
Typical current consumption56 mA at 3.3 V DC

All specifications

BMXDDO3202 additional specifications
ParameterValue
Output short-circuit protectionWith external fuse
Power dissipation in4.8 W
Switching frequency0.5/LI² Hz
IP degree of protectionIP20
Response time on output0.3 ms
Shock resistance30 gn
Relative humidity5...95 % at 55 °C without condensation
Operating altitude0...2000 m 2000...5000 m with derating factor
Vibration resistance3 gn
MTBF reliability833000 H
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Status LED1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O
Dielectric strength1780 V AC at 50/60 Hz 1 minute, output/ground 1 minute, output/internal logic
Load impedance ohmic> 54.54 Ohm
Protective treatmentStandard version
Discrete output logicPositive
Maximum tungsten load6 W 24 V 3 W 12 V
Discrete output number32 conforming to IEC 61131-2
Paralleling of outputsYes : 3 maximum
Output overload protectionWith electronic circuit breaker 1.5 In < Id < 2 In With current limiter
Reverse polarity protectionReverse mounted diode
Output overvoltage protectionWith transil diode
Ambient air temperature for storage-40...85 °C
Ambient air temperature for operation0...60 °C

Product details

Module in the X80 rack

The BMXDDO3202 is a solid‑state discrete output module for the Modicon X80 platform, delivering 32 positive‑logic outputs at 12…24 V DC, each rated 0.55 A and individually protected against overload, short‑circuit (external fuse required), overvoltage (transil diode), and reverse polarity. Maximum module current is 17.6 A; parallel up to three outputs for higher load current. Response time is 0.3 ms. It draws 56 mA at 3.3 V DC from the backplane, dissipating 4.8 W. Operating temperature 0…60 °C, storage –40…85 °C, 5…95 % RH non‑condensing. Vibration 3 gn, shock 30 gn. Altitude 0…2000 m standard, 5000 m with derating.

On‑board diagnostics include a green RUN LED, per‑channel green channel diagnostic LEDs, a red module error (ERR) LED, and a red module I/O LED.

Integration notes

Mount in an X80 rack slot; the module uses an external fuse for short‑circuit protection. Load impedance must exceed 54.54 Ω for ohmic loads. Maximum leakage current in state 0 is 0.1 mA; voltage detection threshold for preactuator fault is below 14 V DC and for preactuator at state 0 above 18 V DC. Output overload is handled by an electronic circuit breaker (1.5 In < Id < 2 In) and a current limiter.

Frequently asked questions

What compliance directives does the BMXDDO3202 meet?

It complies with Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.

What are the key output ratings of the BMXDDO3202?

32 solid‑state outputs, 0.55 A per channel, 17.6 A total module current, response time 0.3 ms, MTBF 833,000 hours.

What diagnostic LEDs does the BMXDDO3202 provide?

One green RUN LED, one green LED per channel for diagnostic, one red module error (ERR) LED, and one red module I/O LED.

MPN
BMXDDO3202