Schneider Electric BSH0701M11A2A
MPNBSH0701M11A2A
Active
servo motor BSH, Lexium 05, 1.4N.m, 1500rpm, 70mm, keyed shaft, Sincos single turn, without brake, IP50
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Identification
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
Performance
| Parameter | Value |
|---|---|
| Nominal torque | 1.36 N.m for LXM05AD10M3X, 200...240 V, three phase 1.36 N.m for LXM05BD10M3X, 200...240 V, three phase 1.36 N.m for LXM05CD10M3X, 200...240 V, three phase |
| Nominal output power | 210 W for LXM05AD10M3X, 200...240 V, three phase 210 W for LXM05BD10M3X, 200...240 V, three phase 210 W for LXM05CD10M3X, 200...240 V, three phase |
| Nominal speed | 1500 rpm for LXM05AD10M3X, 200...240 V, three phase 1500 rpm for LXM05BD10M3X, 200...240 V, three phase 1500 rpm for LXM05CD10M3X, 200...240 V, three phase |
| Maximum mechanical speed | 8000 rpm |
| Continuous stall torque | 1.4 N.m for LXM05AD10M3X, 200...240 V, three phase 1.4 N.m for LXM05BD10M3X, 200...240 V, three phase 1.4 N.m for LXM05CD10M3X, 200...240 V, three phase |
| Peak stall torque | 2.66 N.m for LXM05AD10M3X, 200...240 V, three phase 2.66 N.m for LXM05BD10M3X, 200...240 V, three phase 2.66 N.m for LXM05CD10M3X, 200...240 V, three phase |
| Rotor inertia | 0.25 kg.cm² |
Electrical
| Parameter | Value |
|---|---|
| Network phases | 3 |
| Maximum current (Irms) | 3.1 A for LXM05AD10M3X 3.1 A for LXM05BD10M3X 3.1 A for LXM05CD10M3X |
| Continuous stall current | 1 A |
| Maximum permanent current | 3.1 A |
| Torque constant | 1.4 N.m/A at 120 °C |
| Back-EMF constant | 85 V/krpm at 120 °C |
| Stator resistance | 35.4 Ohm at 20 °C |
| Stator inductance | 131.9 mH at 20 °C |
| Stator electrical time constant | 3.73 ms at 20 °C |
| Electrical connection | Rotatable right-angled connectors |
Feedback
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn |
Mechanical
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 11 mm |
| Shaft length | 23 mm |
| Second shaft end | Without second shaft end |
| Key width | 18 mm |
| Motor flange size | 70 mm |
| Mounting support | International standard flange |
| Length | 154 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 5.5 mm |
| Mounting-hole bolt circle diameter | 82 mm |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Maximum radial force (Fr) | 360 N at 6000 rpm 380 N at 5000 rpm 410 N at 4000 rpm 460 N at 3000 rpm 520 N at 2000 rpm 660 N at 1000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
Environmental
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 standard |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 120 °C |
MPN
BSH0701M11A2A